T5 slave cylinder  kit

94-95 T5 Hydraulic Clutch Slave Cylinder Kit

  $186.99  + $20.00 S&H

Orders that are canceled will be refunded less the 3-6% fee that PayPal no longer returns when a refund is issued.

Back to Parts List Page

The 94-95 T5 has a longer input shaft and requires a 94-95 bellhousing.  The newer bellhousing, besides beeing deeper, has the clutch fork in a lower position.  This T5 slave cylinder kit provides everything needed to install a slave cylinder on to a 94-95 T5 transmission:

94-95 T5 Hydraulic Clutch Brackets                Firewall Reinforcement plate
SS hydraulic clutch pushrod                             7/8" slave cylinder
Mounting hardware
The master cylinder and connecting lines are not included as different applications my require variations of these parts. (however I do offer a MC and line kit, see "Related Parts" below) On Most 65/66 cars, equipped with a power booster, this kit will not work.  However I was able to install this kit with a MPB boosetr kit by making some small modifications. 

Note when ordering: 67-70 Mustangs use a different kit than the 65-66 Mustangs. ALSO double check your bellhousing to confirm which kit you need. Some newer bellhousings have the clutch fork in a lower location. Please see picture below. The bellhousing on the right works with a 94-95 T5 kit and the bellhousing on the left requires the 86-93 (Foxbody) T5 kit.
International Shipping Available.  Email me for additional cost information
Which Bellhousing do you have?

86-93                                       94-95

 
New and reproduction parts
    If you need to order replacement reproduction parts for your Mustang make sure you check out Steve's Mustang Parts.


© 2020 Rosehill Performance Parts
The words / logos for Ford, Mustang, etc are used for descriptive and reference purposes only. Rosehill Performance Parts is neither affiliated with  Ford Motor Company nor the manufacturers/distributors of Ford or other automobiles.